Camera trap + 12 AA batteries + 1 32 GB memory card

PIE1046 PACK 1 PIE1046 camera trap + 12 AA batteries + 1 32 GB memory card With the PIE1046 camera trap, you can receive photos and videos taken by the camera (by MMS or e-mail for photos, by e-mail for videos). A built-in GPS antenna enables geolocation of photos. As soon as the SIM card (standard size) is inserted, the device automatically detects the mobile operator and sets the corresponding sending parameters (works in 2G, 3G and 4G). Thanks to the 4G network, the transmission of photos or videos is more rapide and saves energy. The PIE1046 camera trap can be set and triggered remotely via a free mobile app available for Android and iOS. Wide detection angle: 100° Wide shooting angle: 100

Features of the PIE1046 camera trap

• Wide angle of view: 100
• PIR sensor (motion detector) :
• Wide angle of detection: 100
• Detection distance: approx. 20 m
• Adjustable detection sensitivity: low / medium / high
• Flash Infrared :
• Invisible black LEDs
• Range: approx. 20 m
• Possibility of muting part of the LEDs:
• prevents overexposed night photos/videos
• useful if you want to place the camera close to the subject to be photographed/filmed
• Flash infrared with automatic light-dependent activation
• Adjustable night mode: a longer or shorter exposure increases or decreases the range of flash infrared light
• Photo and/or video recipients:
• You can enter 1, 2, 3 or 4 cell phone numbers (recipients will only receive MMS and therefore only photos, not videos)
• You can enter 1, 2, 3 or 4 e-mail addresses (recipients will receive MMS or e-mails depending on the settings chosen and therefore photos and/or videos)
• Sending photos :
• by MMS: you can only send photos in small format (640x480)
• by e-mail (FTP or SMTP): you can choose the size of photos sent by e-mail:
• small size (640x480)
• large size (1920x1440)
• original size (8 MP, 12 MP or 24 MP depending on the selected photo resolution)
• Sending videos :
• by E-mail (FTP or SMTP) only and if the 4G network is available where you set up the camera trap.
• Possibility of setting and triggering the camera remotely via a free mobile application (Android/iOS) - Application name: NumCam
• When the SIM card (standard size) is inserted, the device automatically detects the mobile operator and fills in the corresponding MMS/email sending parameters (only if the operator is part of the list of operators pre-programmed in the device).
• Remote antenna included :
• for better reception in areas with poor network coverage
• antenna height: 22 cm - cable length: 2 m - magnetic base
• Capture modes :
• Photo: from 1 to 5 photos per trigger
• Video with audio: programmable duration from 5 to 59 seconds
• Photo + Video with audio: a photo and then a video are taken each time the shutter is released
• Photo resolution: 8 MP / 12 MP / 24 MP
• Photo file format: JPEG
• Video resolution: WVGA / HD 720P / Full HD 1080P
• Video file format : MOV
• PIR detection mode: the camera takes photos or videos when the passive infrared (PIR) sensor detects activity in the area it covers
• Time Lapse mode: photos or videos are taken automatically at regular intervals during a user-defined time slot
• Hybrid mode: PIR detection + Time Lapse operation at the same time
• Photo markings: time, date, temperature, lunar phase, camera identification number, battery charge level, photo coordinates GPS
• Memory: SD or micro SD card with adapter from 4 GB to 32 GB, class 10 minimum
• Loop recording on memory card:
• User-programmable: ON/OFF
• When the memory card is full, the camera records new photos/videos while deleting the oldest photos/videos.
• Programmable camera ID: allows you to identify where and by which camera a photo was taken, which can be very useful if you have several cameras.
• Programmable password

Reliable and efficient

• 2-year warranty
• Weatherproof design (IP66)
• Trigger speed: approx. 0.4 seconds

Ergonomics of the PIE1046 camera trap

• Weight: 418 g (without batteries) - 696 g (with batteries)
• Dimensions: 148 x 116.5 x 75.5 mm
• Remote antenna supplied
• Power supply: 12 AA alkaline batteries or 12 AA Ni-rechargeable batteriesMH
• Optional external power supply: power pack or solar panel
• 2.4" (~ 5 cm) color LCD display: for easy set-up and viewing of photos and videos
• Port USB 2.0 for file downloading

1 PIE1046 camera trap 12 AA (LR06) alkaline batteries 1 32 GB memory card 1 black antenna 1 remote antenna 1 USB cable 1 strap nylon 1 user guide

Here are some tips for setting up your camera trap in the field:

• Install the device at a height of approx. 1.5 m/2 m, facing slightly downwards.
• Set up facing north or south. Do not face east or west, as sunrise and sunset can cause the camera to be triggered unexpectedly, resulting in overexposed images.
• To monitor a coulee, point the camera along the coulee rather than perpendicular to it. This allows you to see several animals at a time if they pass in line.
• Avoid placing the camera on a frail tree that may move in strong winds. Try to place the camera on a stable, fixed support.
• Clear away any branches or weeds in front of the camera. In windy conditions or high temperatures, they could cause the camera to shut down unexpectedly.
• Check the condition of the batteries before setting up the camera.
• Make sure you have inserted the memory card correctly.
• Check that the date and time are correct.
• Make sure the selector switch is in the "ON" position before you leave.